Please download Java(tm).
 

Boilers, Steam Boilers, Thermic Fluid Heaters, Hot Air Generators, Hot Water Generators, Hot Water Boilers, Oil and Gas Burners, Fluidized Bed Dryers, Water Treatment Plants

 
SR.NO.    DESCRIPTION
1    FUEL OIL TANK
2    FILTER
3    FUEL PUMP
4    SHELL ASSEMBLY
5    BLOWER
6    OIL PRESSURE GAUGE
7    PHOTORESISTOR
8    BURNER
9    EXPANSION DEAERATOR TANK
10    PROCESS EQUIPMENTS
11    T.F. CIRCULATION PUMP
12    THERMIC FLUID COIL
13    DIFF. PRESSURE SWITCH
14    TEMP.IND.CONTROLLER
15    TEMP.IND.CONTROLLER

 
   PROFILE

   SUPERTHERM Thermic Fluid Heating Systems are available in vertical design ranging from 50,000 Kcal/Hr to    15,00,000    Kcal/Hr.Temperatures up to 3400C (Pressurised). Oil, Gas, Solid fuel fired and electrically heated.
 
   DESIGN FEATURES

     SUPERTHERM is designed for high efficiency of 87+2%

   •  Fully Automatic Operation SUPERTHERM runs ON-OFF automatically on heat  requirement, hence    consumes      minimum fuel & gives best operating efficiency.
   •  Designed for heating thermic fluid up to 300°C almost at atmospheric pressure.
   •  We can supply Thermic Fluid heaters up to 340°C.(Pressurised)
   •  Designed for easy operation & maintenance.
   •  All standard indigeneous parts ensures easy availability of spares.
   •  Due to Coil type design & maximum safety features incorporated, there are no explosion hazards.
   •  The Pressure Jet Burner of the thermic fluid heater is adjusted to a high CO2 content & a high degree of      efficiency maintaining clean combustion, almost free of air pollutants.
 
   INSTRUMENTATION, CONTROLS & SAFETIES

    SUPERTHERM is a fully automatic T.F. Heater. In any abnormal conditions either due to Oil, Air, T.F. Level, T.F.     Pressure or Flame failure SUPERTHERM shuts off & gives an alarm, indicating fault on control panel, so we     can easily rectify the fault
 
    LOW INSTALLATION COSTS

   Compact vertical design saves valuable floor space than other types of heaters. Almost no foundation    expenses.
 
   We also make High Temperature Units (Above 3000C) Unit.
 
 
   NOTES :

•  THE THERMAL EFFICIENCY IS GUARANTEED IN OUR TEST BED WITH COMMERCIALLY CLEAN INTERNAL AND EXTERNAL    HEATING SURFACES.

•  THE EFFICIENCY IS SUBJECT TO FUEL OIL AS PER LDO - IS:1460, FO - IS:1593 WITH SEDIMENT    CONTENT NOT MORE    THAN    0.04% BY WEIGHT, VISCOSITY NOT MORE THAN 1500 SEC. REDWOOD No. 1    AT 37.8 O C (100 O F) AND NO    CONRADSON    CARBON. NCV of HSD-10,500 Kcal/Kg. LDO-10,200 Kcal/Kg.    FO-9,650 Kcal/Kg.

•  SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.